Development of Return to Base Flight Trajectory Generator Based on Dubins Path - Vector Field Method

Sari

In a Return to Base (RTB) situation, aircraft needs to immediately fly back to its origin airport. Since there is no published flight procedure for an RTB, an Air Traffic Controller (ATC) will assist the pilot for the flight procedure to fly. The objective of this work is to generate a flight trajectory in RTB situation based on the available airport flight procedures (departure and arrival) in Kertajati airport. The Dubins Path was used as a method to generate the flight trajectory and supported by the Vector-Field Methodology. The Python programming simulation was used to simulate the flight trajectory generation in the normal condition, second closest waypoint condition, and different parameters value condition. The trajectory was simulated based on flight characteristic of a single engine aircraft (Cesna 172) and multi-engine aircrafts (Boeing 737-800NG). The simulation results show that the Dubins Path and Vector-Field methodology success to generate the flight trajectory in different types of condition and parameters. The increase in aircraft velocity and the decrease in aircraft bank angle caused an increase in the aircraft turning radius. While, the decrease in aircraft flight path angle caused increase in the length of Dubins Path line.