ANALISIS FAKTOR-FAKTOR PENYEBAB CACAT PENGELASAN PIPA API 5L Gr.B PADA PROYEK KONSTRUKSI PIPA

HARI MOEKTIWIBOWO, GALUH SURYA WIJAYANTO, BASUKI ARIANTO

Sari


This study aim to analyze the factors that occur any defects of weld and determine patterns and types of weld defects were found in the results of welding joint. in the construction of the pipeline API 5L Grade B along 70 Km from Gresik - Surabaya by PT. XYZ. In this study, the method that use is Seven Tools which is one of the tools in the processing of data for quality improvement, to be good communication on team work, and to decision making, and the results will be applied by the company, And the results of this observation the cause of welding defect is 4M1E, that is Man, Machine, Method, Material and Environment. And the welder does not carry out welding in accordance with WPS (Welding Procedure Specification).

Keyword : Quality Control System


Teks Lengkap:

PDF

Referensi


Arikunto, S., 2002, “Prosedur

Penelitian Suatu Pendekatan

Praktek”, Edisi Revisi V.

Dieter, G. E., 1987, Metalurgi

Mekanik: Jilid 1, Penerbit Erlangga,

Jakarta

Gasperz, Vincent. 2005. “Total Quality

Manajemen. Jakarta” :

PT.Gramedia Pustaka Utama

Gasperz, Vincent. 2007. Lean Six

Sigma. Jakarta : PT. Gramedia

Pustaka Utama.

Heizer, Jay dan Barry Render.2006.

“Manajemen Operasi ed7”.

Jakarta: Salemba

Empat.

J.M Juran. 1988. “Juran's Quality

Control Handbook 1&2”, 4th

edition, McGrawHill, Inc.

Krajewski and

Ritzman.1987.”Operation

Management, Strategy &

Analysis”, Wesley Publishing

Company, Inc.

Latief, Y. & R. P. Utami. 2009.

Penerapan Pendekatan Metode Six

Sigma Dalam Penjagaan Kualitas

Pada Proyek Konstruksi. Makara

Teknologi. Volume 13 No.2 67-72.

Universitas Indonesia, Depok.

MN. Nasution.2005.”Manajemen Mutu

Terpadu (Total Quality

Management)”, Ghalia Indonesia,

Jakarta

Reksohadiprojo, Soekanto & Indriyo

GitoSudarmo. 2000. Manajemen

Produksi. Edisi keempat. BPFE,

Yogjakarta.

Sofjan Assauri. 1998. “Manajemen

Operasi Dan Produksi”. LP FE UI,

Jakarta.

Sugiyono. 2004. Metode Penelitian

Bisnis. Bandung : CV Alfabeta

Suyadi Prawirosentoso. 2007. Filosofi

Baru Tentang Manajemen Mutu

Terpadu Abad 21 “ Kiat

Membangun Bisnis Kompetitif”.

Bumi Aksara, Jakarta.

Widharto S, 2003. “Petunjuk Kerja

Las”, Cetakan-5,Pradnya Paramita,

Jakarta.

Zulian Yamit. 2003 .”Manajemen

Produksi dan Operasi Ed.2”.

Ekonisia, Yogyakarta.




DOI: https://doi.org/10.35968/jtin.v4i2.819

Refbacks

  • Saat ini tidak ada refbacks.


Indexed by: