PALANG PINTU PERLINTASAN KERETA API AUTOMATIS BERBASIS ARDUINO UNO
Sari
At this time the accident at the railroad crossing is still quite high, it is caused by various things, including the doorstop system which still relies on the manual system and is very vulnerable to human error such as the gate guard fatigue so late closing the doorstop, and on the design ever made previously using ultrasonic sensors still have the disadvantage that the sensor can only detect objects without being able to distinguish what objects are in front of the sensor.
In this case a design or prototype of a doorstop that functions automatically based on an Arduino microcontroller can be applied to reduce the number of accidents on a railroad train and prevent detection errors on the sensor by adding a warning signal in the form of SMS. Ultrasonic sensor test results work well by detecting objects in the form of trains with a predetermined setpoint, with a working height of 4.90 volts DC for sensor 1 namely ordering the bar to close and 4.91 volts DC for sensor 2 which instructs the bar to open, for the SIM module GSM works well sending a warning signal in the form of an SMS message if there is an object blocking in the distance <= 6cm.
Keywords: Arduino-Based Automatic Railway Crossing
Teks Lengkap:
PDFReferensi
Farouq, U. (2018). Studi Pengaruh Perlintasan Sebidang Jalan Dengan Rel Kereta Api Terhadap Lalu Lintas (Studi Kasus: Perlintasan Kereta Api Jalan Karakteristik Bung Tomo Surabaya)(Doctoral dissertation, UNIVERSITAS 17 AGUSTUS 1945).
Kadir, Abdul. 2017. From Zero to a PRO Arduino Edisi Revisi. Yogyakarta: Penerbit Andi.
Muradi, D. R. (2018). RANCANG BANGUN SISTEM PEMANTAU KEAMANAN TERHADAP PENCURIAN PADA LUMBUNG PADI MENGGUNAKAN SMS GATEWAY BERBASIS ATMEGA 32 (Doctoral dissertation, University of Muhammadiyah Malang).
Mengukur –jarak –dengan –sensor –ultrasonik –hc-sr04 (https://embeddednesia.com/v1)
Nandariyanto, R., Alfi, I. (2018). Rancang Bangun Aplikasi Palang PintuKereta ApiBerbasis Arduino ( Doctoral dissertation, University of Technology Yogyakarta).
Pratama, S Taqwa, A., &Salama, I. (2019). Palang Pintu Kereta Otomatis Berbasis Arduino Uno. ProsidingSENIATI, 5(3), 226-229.
PUTRA Y, Y. U. N. A. N. D. A. (2017). Prototype Palang Pintu Kereta Api Otomatis Berbasis Mikrokontroler menggunakan Arduino Uno (Doctoral dissertation, Politeknik Negeri Padang).
Peraturan Menteri Perhubungan NO 44 Tahun 2018 Tentang Persyaratan Teknis Peralatan Persinyalan Perkeretaapian.
Prinsip-Kerja-Dc-Power-Supply-Adaptor (https://teknikelektronika.com/)
Reinardus, A. (2018). Perbuatan Penjaga Perlintasan Kereta Api yang Lalai Menutup Palang Pintu sehingga Berakibat Terjadinya Korban Kecelakaan Kereta Api Ditinjau dari Undang-Undang Nomor 23 Tahun 2007 tentang Perkeretaapian.
Rusmadi, Dedy. 2007. Belajar Rangkaian Elektronika Tanpa Guru, Bandung: Delfajar Utama.
Sitepu, R., Tobing, A. F., & Indra, I. (2017). Prototipe Pintu Lintasan Rel Kereta Api Otomatis. Widya Teknik, 7(1), 35-44.
Undang – Undang Republik Indonesia No. 23 Tahun 2007 Tentang Perkeretaapian (https://www.dpr.go.id › dokjdih › document › uu › UU_2007_23)
DOI: https://doi.org/10.35968/jti.v9i0.657
DOI (PDF): https://doi.org/10.35968/jti.v9i0.657.g628
Refbacks
- Saat ini tidak ada refbacks.
Indexed by: